Change Your PS4’s Hard Drive

The PlayStation 4 launched with a 500-gigabyte disk drive. How adorable! They think 500 gigabytes is enough data! Hey, Sony! this is not 2008. 500 gigs aren’t getting to cut it. Not when you’re games have mandatory installs. Not when your games are 40 to 50 gigs a bit. you are making us juggle data. That’s fine with smartphones, where apps are often deleted and reinstalled in 30 seconds. it isn’t OK when your games are absolutely massive and may take a few HOURS to put in games. Why would you not ship with a minimum of a terabyte? It’s ridiculous! you’ll shut up too, Microsoft. You shipped with an equivalent size hard drive! Not only that but a minimum of Sony ships together with your average normal laptop disk drive. together with your console you’ve got to shop for a proprietary drive. So, let me say this with the maximum amount of professionalism I can muster: Boooooooooooooooooooooooooooooooooooooooooooo!

Anyways, there’s a simple solution to the present problem. that’s to only replace the disk drive yourself. Whoa settle down, don’t cry. Oh gosh, you’re crying. it isn’t that tough. It’s actually pretty easy. you are not crying anymore? OK, good. Please hold your composure, that was awkward for both of us. Great now you’re crying again. Let’s just advance …

PLEASE NOTE: I don’t think that this may void your warranty, however, it’s in your best interest to contact Sony to form sure. i’m in no way liable for any damage or voided warranties that may happen as a result of a tough drive swap. Please proceed at your own caution!

The first step is to collect the materials! So first you’ll need a replacement disk drive. I used a 1 terabyte Seagate hybrid drive. confirm that the drive is a 2.5-inch drive, otherwise, it’ll not slot in the PS4. you’ll also use a solid-state drive. That being said, I do not think you’ll get a really significant speed boost from it. Plus solid-state storage has been traditionally far more expensive than a traditional platter disk drive. otherwise, you could get a standard disk drive with plenty of storage. the rationale I went with a hybrid drive is that you simply get most of the advantages of the solid-state drive mixed with the cheaper mass storage of a standard platter-based disk drive.

Pictured: Seagate Hybrid Drive

You will also need a computer handy. Ugh, I know. I’m asking such a lot of you. Using that computer navigate to Sony’s site. Find the newest firmware. confirm that you simply get the As of the date this text is published that firmware is 3.15. you’ll also need a 1-gigabyte thumb drive, for putting the downloaded firmware onto, also as if you propose on backing up saves and game data. confirm it’s formatted to FAT32. Right-click on the flash drive, and click on format and confirm FAT32 is chosen. you’ll need a PS4 controller and a USB cord. Lastly, get a handy dandy screwdriver!

If you propose backing up your saves, plug the USB drive into the PS4, navigate to the settings menu. Under the settings menu find the “Application Saved Data Management” menu. Find a copy and restore, and follow the on-screen directions.

Next, let’s get down and dirty and begin dismemberment the PS4. The very first thing you ought to do is that confirm the PS4 is turned off. Unplug it from the wall, just just in case. Next, what you ought to do is tug the glossy plastic piece off the PlayStation. it’ll require a touch force, so do not be afraid to use some. It should slide off with relative ease. you ought to see the disk drive inside its cage. there’ll be a rather large screw with the PlayStation icons of the square, circle, x, and triangle thereon. Remove that screw together with your Phillips head screwdriver. Pull the cage out of the PS4. Good job so far!

Now examine the disk drive caddy, notice the orientation of the disk drive, and see the four screws holding the disk drive into the caddy. Unscrew these remove your old disk drive. confirm that the rubber pieces stay in situ. Place the new disk drive within the same position because the old one, and screw it into place using the 4 screws you only took out. Slide the caddy with the disk drive attached back to the cage inside the PS4. plow ahead and slide the black glossy plastic piece back onto the PlayStation 4 and shut it copy.

So very first thing is first, let’s get your new thumb drive ready! connect your thumb drive to your computer. Find your thumb drive on your computer. It is often found under the “This PC” folder if you’re on Windows 8 or higher or “My Computer” if you’re on Windows 7 or lower. Once you are doing that, on the thumb drive create a folder called “PS4” then within that folder create another folder called “UPDATE”, and once you are doing that paste the file PS4UPDATE.PUP into that folder. Once you finish that up, safely unplug your thumb drive and plug it into the PlayStation.

Navigate right down to number 7

Plug the PS4 back to the wall. Plug your PS4 controller into the console. Locate the facility button at the front of the console and hold it down for about 7-10 seconds. Using the controller navigate to the “Initialize PS4 (Reinstall System Software).” Now, let the PS4 do its thing, and it should run through. Once it does, it should land you on the initial found out screen, where you’ll reenter all of your account information, enter the date and time again, and hook up with the web.

The last item you would like to try to do is to travel back to the settings menu and back to where you protected all of your saves. Now you would like to try to reverse and restore the applications you protected. Once you are doing that return to the PlayStation Store and re-download all of your games. Your PS4 should now be during a similar state to once you began.

That’s it! Congratulations! you’ve got a storage solution from this decade! I’m pleased with you. Oh god, you’re crying again. Yes, I do know this is often an enormous deal.


By Mk Faizi

I am a blogger.